Friday, February 11, 2011

Breather Repair pt. 4

Got the reed valve breather in today and I finished up making the sleeve and cutting the window in.  Getting the bottom end put back together tonight and I'm getting the jugs and pistons back from the machine shop tomorrow. Hoping it's burning fuel on Sunday!

Still need to machine the sleeve for the cam gear then it can be welded


2 comments:

  1. no mods to mkae the reed valve work in a flatside case ????

    ReplyDelete
  2. yea, you need to clearance the reed valve for the cam shaft. also I machined a new breather pocket that the valve press fit into so it doesn't move.

    ReplyDelete