 |
| Then some people decided to try and blast through a snow pile |
 |
| So we got to make some beer money |
Wednesday, January 12, 2011
Yea, it's Winter
The plow trucks just weren't cutting it so I decided to stop fucking around and break out the TD-7E.
Tuesday, January 11, 2011
Monday, January 10, 2011
Sunday, January 9, 2011
Saturday, January 8, 2011
New T-Sirts Available!!!
Thanks to my brother we have some t-shirt designs available @ $15 for one (1) $25 for two (2).
 |
| Shirt 1 Front |
 |
| Shirt 1 Back |
 |
| Shirt 2 Front |
 |
| Shirt 2 Back |
Wednesday, January 5, 2011
Rear hub
 |
| I started machining my rear hub from that piece of 6" 6061. I got it running true and bored the axle hole. Then I was able to put in registration marks so that I could attach the juice drum on the drive side. Sometimes i keep old broken parts in hopes that I can use them for something one day. In this case, this broken drum was perfect. I drilled out the alignment pins and machined a shouldered piece of aluminum that fit the bore of the bearing race on the drum roughly 1 5/8" while the smaller end fit the 1" hole I machined in the hub. I then drilled and tapped one of the holes so that the plate would fit tight to the hub as well as keeping it from rotating while I drilled the rest of the holes. The other side will receive a 5 hole bolt pattern so that it can mate to a 15" car rim. Update coming. |
Monday, January 3, 2011
Sunday, January 2, 2011
Subscribe to:
Posts (Atom)